top of page

Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.

The casings are manufactured from high grade rolled sheet steel protected against corrosion by cataforesis primer and black polyester paint finish.

The drive system consists of an industrial poly V-belt drive pulley system which is enclosed within metal protective guard.

ATEX versions available.
These fans are often used for paint shops etc as the motor is out of the airstream.

Motors
All the motors are IP55 class F, fitted with ball bearings greased for life.
Electrical supplies:
Three phase 230/400V-50Hz or 400V-50Hz

Range of bifurcated axial flow fans with motor isolated from the air stream making this range suitable for continuous operation up to 150ºC.
The casings are manufactured from high grade rolled sheet steel protected against corrosion by grey epoxy-polyester paint finish. All models incorporate one piece die-cast aluminium impellers.
The impellers are finished with red colour epoxy-polyester paint coating.
Available, depending upon the model, with three phase motors in 2, 4 or 6 poles.

This is the TET/4-400N
All the motors are IP55, Class F insulation. Electrical supply: Three phase motors 230/400V-50Hz.

Ask for details of other sizes

The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc.
Range of cabinet fans, manufactured from galvanized steel sheet with double thickness panel (sandwich type) internally lined with 17 mm thickness fireproof fiber-glass acoustic insulation (M0).
All models incorporate direct driven backward curved centrifugal impeller with motor fitted outside of the air stream and suitable for air stream temperature up to 120ºC.
Available with single phase or three phase motors in 4 poles.

Continuous temperature: 120 Deg Centigrade
400 Degrees for two hours (F400-120)

These are the three phase fans, ask for details of single phase.

- Insulation class H
Flue Temperature: < 180 C (continues)
240 C (instantaneous)

- Motor anti-vibration
- Housing and impeller aluminized sheet steel

CRMT Series Forward Curved Centrifugal Fan
Range of single inlet direct drive centrifugal fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked) and suitable for the continuous extraction of air stream up to 300ºC.
All casings are manufactured from electro-welded sheet steel protected against corrosion by grey epoxy-polyester paint coating.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 4 or 6 poles.
This price is for the CRMT/4-225/90-0,55.

Cabinet fans especially designed for use and distribution of heat produced by fireplaces, suitable for continuous extraction of airstreams at temperatures up to 180 º C.
All casings are manufactured in galvanised sheet steel with thermal insulation.
Provided with a thermostat sensor located on the cabinet 0-90º.
Available with single phase motor 230V 50Hz,adjustable.
Used for heat distribution from hot fireplaces to the rest of the house.

The KBT fans have impellers manufactured from galvanised sheet steel with forward-curved blades. The casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm mineral wool.

The KBT fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame.

To protect the motors from overheating the KBT fans have integral thermal contacts with external leads for connection to a motor protection device.

• Max temperature of transported air 120°C
• Speed-controllable
• Integral thermal contacts
• Low sound level
• Single Phase

Smoke extract axial fan Series AXC(B), tested according to EN 12101-3 for 300°C-120min.

THREE PHASE
Air direction Form A (motor first then impeller), direct driven for use inside or outside the smoke reservoir
CE mark of confirmity no 0036 CPD RG04 07
Impeller completely made of aluminium. Balanced statically and dynamically in accordance with DIN ISO 1940-1, quality grade Q = 6,3
Spun flanges for high rigidity, hole pattern in accordance with Eurovent 1/2
Long casing made from hot dip galvanized steel, to DIN EN ISO 1461 Terminal box in IP 65 mounted at the outside of the casing for easy wiring
High temperature three phase motor, directly in the air stream, protection class IP54, insulation class H, according EN 60034-5.
Suitable for operating temperatures of up to 55°C continuously

Sizes from 250mm upwards available, though ALL three phase.
Contact us for details.

Heat Resistant In-line Axial Fans - VOK 150/120 H Series - High Temperature 150°C 

The VOK Series high temperature fans are designed to resist up to 150°C. 

The body, the turbine, and the back shutter of the VOK series heat resistant fans are manufactured from aluminum alloy providing efficient cooling and fire safety, while the noiseless and highly efficient electric motors are sealed for life and totally maintenance free. 

The fan is equipped with a special shutter which protects it from overheating in case of sudden power cut. 

The embedded heat resistant Long Life double capsulated ball bearings guarantee smooth operation for over 30 000 hours of continuous usage.

They can be fitted in hot air distribution ductwork system connected to fireplaces and other heating installations. 

Will operatewith Humidity up to 98%

Spigot Size: 120mm Inlet/Outlet 

◄

1/1

►

Please reload

bottom of page