2102/315/4/1Ph Plate Mounted Extract Fan

The Flakt Woods 2102 range of low cost high quality plate mounted fans.

Our recommended number one plate mounted fan choice.

Flakt Woods reputation for only manufacturing the highest quality products is evident with this low cost range of Plate mounted Fans. Buying this fan gives you the confidence and satisfaction that comes with over 100 years of fan engineering experience.

  • Supplied fully assembled

  • Fully speed controllable

  • Can be used in any non hazardous environment

  • Suitable in temperatures from -40°C to 50°C

  • Low to medium air volumes

  • Low to medium static pressures

  • Available sizes 315mm – 500mm from stock

  • 560mm – 710mm made to order in 3 weeks

  • The grey coloured plate is manufactured from mild steel with a powder coat painted finish.

  • The impeller (the bit that goes around and moves the air) is manufactured from glass filled polypropylene and will stay intact up to temperatures of over 100°C

  • The motors are totally enclosed with class F insulation with protection to IP55. Single phase motors have overheat protection

2102/355/4/1Ph Plate Mounted Extract Fan

The Flakt Woods 2102 range of low cost high quality plate mounted extract fans.

Our recommended number one plate mounted fan choice

Flakt Woods reputation for only manufacturing the highest quality products is evident with this low cost range of Plate mounted Fans. Buying this fan gives you the confidence and satisfaction that comes with over 100 years of fan engineering experience.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable in temperatures from -40°C to 50°C
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 500mm from stock
  • 560mm – 710mm made to order in 3 weeks
  • The grey coloured plate is manufactured from mild steel with a powder coat painted finish.
  • The impeller (the bit that goes around and moves the air) is manufactured from glass filled polypropylene and will stay intact up to temperatures of over 100°C
  • The motors are totally enclosed with class F insulation with protection to IP55. Single phase motors have overheat protection

2102/400/4/1Ph Plate Mounted Extract Fan

The Flakt Woods 2102 range of low cost high quality plate mounted extract fans.

Our recommended number one plate mounted fan choice

Flakt Woods reputation for only manufacturing the highest quality products is evident with this low cost range of Plate mounted Fans. Buying this fan gives you the confidence and satisfaction that comes with over 100 years of fan engineering experience.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable in temperatures from -40°C to 50°C
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 500mm from stock
  • 560mm – 710mm made to order in 3 weeks
  • The grey coloured plate is manufactured from mild steel with a powder coat painted finish.
  • The impeller (the bit that goes around and moves the air) is manufactured from glass filled polypropylene and will stay intact up to temperatures of over 100°C
  • The motors are totally enclosed with class F insulation with protection to IP55. Single phase motors have overheat protection
Please reload

2102/450/4/1Ph Plate Mounted Extract Fan

The Flakt Woods 2102 range of low cost high quality plate mounted extract fans.

Our recommended number one plate mounted fan choice

Flakt Woods reputation for only manufacturing the highest quality products is evident with this low cost range of Plate mounted Fans. Buying this fan gives you the confidence and satisfaction that comes with over 100 years of fan engineering experience.

  • Supplied fully assembled

  • Fully speed controllable

  • Can be used in any non hazardous environment

  • Suitable in temperatures from -40°C to 50°C

  • Low to medium air volumes

  • Low to medium static pressures

  • Available sizes 315mm – 500mm from stock

  • 560mm – 710mm made to order in 3 weeks

  • The grey coloured plate is manufactured from mild steel with a powder coat painted finish.

  • The impeller (the bit that goes around and moves the air) is manufactured from glass filled polypropylene and will stay intact up to temperatures of over 100°C

  • The motors are totally enclosed with class F insulation with protection to IP55. Single phase motors have overheat protection

 

2102/500/4/1Ph Plate Mounted Extract Fan

The Flakt Woods 2102 range of low cost high quality plate mounted extract fans.

Our recommended number one plate mounted fan choice

Flakt Woods reputation for only manufacturing the highest quality products is evident with this low cost range of Plate mounted Fans. Buying this fan gives you the confidence and satisfaction that comes with over 100 years of fan engineering experience.

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable in temperatures from -40°C to 50°C
  • Low to medium air volumes
  • Low to medium static pressures
  • Available sizes 315mm – 500mm from stock
  • 560mm – 710mm made to order in 3 weeks
  • The grey coloured plate is manufactured from mild steel with a powder coat painted finish.
  • The impeller (the bit that goes around and moves the air) is manufactured from glass filled polypropylene and will stay intact up to temperatures of over 100°C
  • The motors are totally enclosed with class F insulation with protection to IP55. Single phase motors have overheat protection

31JM/16/4/5/34/1Ph Long Cased Axial Flow Fan

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, it will enhance your reputation for only using the best quality products

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment (also available for hazardous application on request)
  • Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)
  • Low to high air volumes
  • Low to high static pressures
  • Available sizes 315mm – 710mm from stock
  • 800mm – 1000mm made to order, ring for availability
  • 1000mm + check for availability
  • The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal
  • The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium
  • The motors are totally enclosed with class F insulation with protection to IP55.
Please reload

35JM/16/4/5/40/1Ph Long cased axial flow extract fan

it has been replaced with a EJ361460 to make it ERP 2013 compliant (please be aware there may be a performance difference, check if in doubt)

All spare parts are still available to buy; the motor part code is BT414013

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, it will enhance your reputation for only using the best quality products

  • Supplied fully assembled

  • Fully speed controllable

  • Can be used in any non hazardous environment (also available for hazardous application on request)

  • Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)

  • Low to high air volumes

  • Low to high static pressures

  • Available sizes 315mm – 710mm from stock

  • 800mm – 1000mm made to order, ring for availability

  • 1000mm + check for availability

  • The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal

  • The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium

  • The motors are totally enclosed with class F insulation with protection to IP55.

40Jm MaxFan high pressure long cased axial extract fan

The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans

This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required

A typical application where this fan is commonly used is in the catering industry where a high level of filtration is required, usually the result of fitting odour control via Pre and Carbon Filters*

The build quality and reliability are the highest we have ever experienced, in a range of fans that are designed to work harder than most

Every time you fit this fan you know you’ve made the right choice, and it will enhance your reputation for only using the best quality products

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment
  • Suitable in temperatures from -40°C to 50°C
  • Low to high air volumes
  • Low to high static pressures
  • Available sizes 315mm – 630mm from stock

The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted externally and internally

The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium

The motors are totally enclosed with class F insulation with protection to IP55.

*High pressure systems can also consist of duct size restrictions, an unusual amount of ducting including a high number of bends, other forms of filtration such as Heppa Filters or Electrostatic filters. We can check the suitability of this fan for your application if required, please contact by any means you feel comfortable with and we’ll offer free advice

40Jm/16/4/5/40/1PH Long Cased Axial Flow Fan

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, it will enhance your reputation for only using the best quality products

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment (also available for hazardous application on request)
  • Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)
  • Low to high air volumes
  • Low to high static pressures
  • Available sizes 315mm – 710mm from stock
  • 800mm – 1000mm made to order, ring for availability
  • 1000mm + check for availability
  • The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal
  • The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium
  • The motors are totally enclosed with class F insulation with protection to IP55.
Please reload